Azure

Azure Ozone Generator
The Wassertec Azure Ozone Generator is a simple yet rugged and reliable Corona Discharge type ozone generator for small water treatment applications where ozone measurement and control are not required.
- Simple, Efficient, Reliable.
- Available in 3 sizes Azure 1, 2 or 3.
- Can be used with either Ambient air or oxygen-feed gas.
Proven Reliability
Azure has been designed for continuous operation in domestic and light commercial applications with minimal maintenance. The Azure is available in sizes of 1, 2 & 3 ozone modules.
All components are of high quality and chosen for their durability and resistance to ozone. The stainless steel housing features a cover that allows the unit to be mounted outdoors in moderately sheltered environments (away from direct sunlight/rainfall).
Azure has 2 ozone outputs depending on the type of feed gas used:

Azure 1
OXYGEN FEED:
5gr/hr from Oxygen 3 lit/min
Azure 2
OXYGEN FEED:
5gr/hr from Oxygen 4 lit/min
Azure 3
6 gr/hr from air 20 lit/min
OXYGEN FEED:
15gr/hr from Oxygen 5 lit/min.
Features
Benefits

Azure Ozone Generator combined with the Wassertec OX5 Oxygen Generator and a small oil-less compressor.
Water Disinfection System
The Corona Discharge Azure can be supplied as an individual ozone generator or as part of a system that offers a complete water disinfection solution.

The system comprises the following components:
- Azure Corona Discharge Ozone Generator1
- Stainless Steel Ebara water pump 2
- Mazzei Venturi Injector for dosing ozone3
- System start/stop circuit breaker switch4
- Air filter5
- Ozone-resistant Teflon tubing 6
- Ozone-resistant non-return valve 7
Installation
The system is typically installed as shown in the diagram above.
Water to be treated is stored in a tank (up to 10,000 litres).
The pump circulates water in the tank through the venturi.8 In doing so the venturi creates a vacuum that draws ozone into the water. Ozone disinfects and decontaminates the water.
The treated water9 can then be pumped to its point of use, preferably via a filter.
Tech Specs
Azure 1G
Azure 1G | ||
---|---|---|
Ozone Output | 2gr/hr from Air @ 10lit/min or 5gr/hr from 95% Oxygen @ 3 lit/min | |
Ozone output from Dry Air at 20°C (68°F) with -40°C (-40°F) dew point | 1.5 grams/hour at 10 litres/minute flow rate. |
|
Ozone output from Oxygen at 95% purity | 3.5 grams/hour at 4 litres/minute flow rate. |
|
Size and Weight | Height: 365mm (14.37 inches) Width: 295mm (11.61 inches) Depth: 130mm (5.12 inches) Weight: 5kg (11.02 pounds) |
|
Power | 230V - 50Hz - 100W, Unit must be earthed. |
|
Enclosure | 304 Stainless Steel, laser cut. |
|
Ozone Modules | 1 x 2gr/hr (Air) or 5gr/hr (Oxygen) | |
Ozone Cell Construction | 316 Stainless Steel electrode, Teflon end caps, Alumina Ceramic dielectric, Silicone o-rings. |
|
Venturi Injector | Mazzei Injector Model 684 / 784, Material: Kynar (PVDF). |
|
Mounting Options | Ozone Generator is wall mounted. Venturi can be mounted horizontally or vertically. Connection to ozone generator via 8mm Teflon Tubing. |
Azure 2G | ||
---|---|---|
Size and Weight | Height: 365mm (14.37 inches) Width: 425mm (16.73 inches) Depth: 130mm (5.12 inches) Weight: 7kg (15.43 pounds) |
|
Power | 230V - 50Hz - 200W, Unit must be earthed. |
|
Enclosure | 304 Stainless Steel, laser cut. |
|
Ozone Modules | 2 x 2gr/hr (Air) or 5gr/hr (Oxygen) | |
Ozone Cell Construction | 316 Stainless Steel electrode, Teflon end caps, Alumina Ceramic dielectric, Silicone o-rings. |
|
Ozone Output | 4gr/hr from Air @ 15lit/min or 10gr/hr from 95% Oxygen @ 4 lit/min | |
Ozone output from Dry Air at 20°C (68°F) with -40°C (-40°F) dew point | 1.5 grams/hour at 10 litres/minute flow rate. |
|
Ozone output from Oxygen at 95% purity | 7 grams/hour at 8 litres/minute flow rate. |
|
Venturi Injector | Mazzei Injector Model 684 / 784, Material: Kynar (PVDF). |
|
Mounting Options | Ozone Generator is wall mounted. Venturi can be mounted horizontally or vertically. Connection to ozone generator via 8mm Teflon Tubing. |
Azure 3G | ||
---|---|---|
Size and Weight | Height: 365mm (14.37 inches) Width: 295mm (11.61 inches) Depth: 130mm (5.12 inches) Weight: 12kg (26.45 pounds) |
|
Power | 230V - 50Hz - 400W, Unit must be earthed. |
|
Enclosure | 304 Stainless Steel, laser cut. |
|
Ozone Modules | 3 x 2gr/hr (Air) or 5gr/hr (Oxygen) | |
Ozone Cell Construction | 316 Stainless Steel electrode, Teflon end caps, Alumina Ceramic dielectric, Silicone o-rings. |
|
Ozone Output | 6gr/hr from Air @ 20lit/min or 15gr/hr from 95% Oxygen @ 5 lit/min | |
Ozone output from Dry Air at 20°C (68°F) with -40°C (-40°F) dew point | 1.5 grams/hour at 10 litres/minute flow rate. |
|
Ozone output from Oxygen at 95% purity | 14 grams/hour at 16 litres/minute flow rate. |
|
Venturi Injector | Mazzei Injector Model 684 / 784, Material: Kynar (PVDF). |
|
Mounting Options | Ozone Generator is wall mounted. Venturi can be mounted horizontally or vertically. Connection to ozone generator via 8mm Teflon Tubing. |