The Corona Discharge Azure can be supplied as an individual ozone generator
or as part of a system that offers a complete water disinfection solution.
Azure Ozone Generator
Small General Purpose Corona Discharge Ozone Generator
The Wassertec Azure Ozone Generator is a simple yet rugged and reliable Corona Discharge type ozone generator for small water treatment applications.
Simple, Efficient, Reliable.
Proven Reliability
Azure has been designed for continuous operation in domestic and light commercial applications with minimal maintenance. The Azure is available in sizes of 1, 2 & 4 ozone modules.
All components are of high quality and chosen for their durability and resistance to ozone. The stainless steel housing features a cover that allows the unit to be mounted outdoors in moderately sheltered environments (away from direct sunlight/rainfall).
Azure has 3 ozone outputs depending on the type of feed gas used:
-
Ambient Air
The air you breathe at sea level. Output decreases with altitude.
Ozone Output:0.9g/h* -
Dry Air
Air from an air dryer with -40 degrees C dew point.
Ozone Output:1.5g/h* -
Oxygen (95%)
Oxygen from a cylinder or oxygen concentrator such as the Wassertec OX-5.
Ozone Output:3.5g/h*
* Ozone output in grams per hour (g/h) per module.
Features
- Corona Discharge ozone generator
- Suitable for water treatment/disinfection
- Designed for continuous operation (fully serviceable)
- Domestic and light commercial applications
- Available as an individual unit or complete water disinfection system
- Indoor/outdoor use (provided there is shelter from rain/direct sunlight)
- Durable ozone-resistant components
- 2 x Ozone tubes made from Sintered Alumina Ceramic, Stainless Steel & Teflon
- No glass or nylon parts
Benefits
- Complete water disinfection solution
- Kills bacteria, viruses, and pathogens
- Destroys organic and inorganic contaminants
- Custom-designed systems to meet specific requirements
- Easy to service and maintain
- Built to the highest standards
- Durable, long-lasting components
Water Disinfection System
The system comprises the following components:
- Azure Corona Discharge Ozone Generator1
- Stainless Steel Ebara water pump2
- Mazzei Venturi Injector for dosing ozone3
- System start/stop circuit breaker switch4
- Air filter5
- Ozone-resistant Teflon tubing6
- Ozone-resistant non-return valve7
Installation
The system is typically installed as shown in the diagram above.
Water to be treated is stored in a tank (up to 10,000 litres).
The pump circulates water in the tank through the venturi.8 In doing so the venturi creates a vacuum that draws ozone into the water. Ozone disinfects and decontaminates the water.
The treated water9 can then be pumped to its point of use, preferably via a filter.
Other Products:
Bright Blue 20G – Bright Blue CCS – Ozone Leak Detector – Indigo – UVO – Venturis – Oxygen Concentrators
